Carriers

Standard Loaded and Empty Carriers:  Scroll to bottom of page for products!


Defining Differential Carrier Breaks

Differential carriers are designed to accommodate a range of Ring & Pinion gear ratios for the various tire sizes and vehicle applications associated with them. As the numerical ratio of a gear set increases, the diameter of the pinion gear gets smaller. The reduced size of the pinion gear requires an increasingly thicker ring gear to keep the gear surfaces meshed properly.

It becomes more economical at some point to change the carrier deck height, so that the ring gear is thinner, and requires less material. The illustration above indicates the different carrier deck heights for a Dana 44 differential.

The point at which a different carrier is needed is referred to as a “Carrier Break”. The Gear Ratio at which Carrier Breaks occur varies, depending on the type of differential. For example, if you have a Dana 44 axle with a gear ratio of 3.73 and want to install a 3.92 or numerically higher gear set, you will need a different carrier. The Carrier Break for the Dana 44 is therefore referred to as 3.73 / 3.92.


Differential Deck Heights

The chart below lists the Carrier Breaks and Deck Heights for various differential models, as well as the range of gear ratios that work with each of the carriers available for each model.


Differential Carrier Deck Heights

Model 20

2.73 & Down
1.600″
3.08 & Up
1.800″

Model 35C

3.31 & Down
1.452″
3.55 & Up
1.637″

Dana 30

3.54 & Down
1.800″
3.73 & Up
1.938″

Dana 44

3.73 & Down
2.090″
3.92 & Up
2.410″

Dana 60

4.10 & Down
2.225″
4.56 & Up
2.420″

Dana 70

4.10 & Down
2.215″
4.56 & Up
2.410″

Dana 80

3.73 & Down
2.135″
4.10 & Up
2.312″

GM 12 Bolt Passenger

2.76 & Down
1.410″
3.07–3.73
1.825″
3.90 & Up
2.188″

GM 12 Bolt Truck

2.73 & Down
1.420″
2.76–3.42
1.700″
3.73 & Up
1.943″

GM 10.5″ 14 Bolt Truck

4.10 & Down
4.165″
4.56 & Up
4.520″

GM ’55 Passenger

3.70 & Down
2.260″
4.10 & Up
2.425″

GM 7.5″

3.08 & Down
1.660″
3.23 & Up
1.950″

GM 8.2″

2.73 & Down
1.615″
3.08 & Up
2.00″

GM 8.5″

2.56 & Down
1.530″
2.73 & Up
1.720″


Product Compare (0)


Dana 30, 3.73 and Up, Standard/Open Empty Carrier

Dana 30, 3.73 and Up, Standard/Open Empty Carrier

D30 Standard CASE, 3.73 &..

$88.50

JK Dana 30, 3.73 and Up, Standard/Open Empty Carrier

JK Dana 30, 3.73 and Up, Standard/Open Empty Carrier

JK D30 Standard CASE, 3.73 &a..

$88.50

Dana Model 35, M35, 3.55 and Up, Standard Open Carrier Case (Empty)
Standard open carrier case and spiders, AMC Model 35, 3.31 and down

Standard open carrier case and spiders, AMC Model 35, 3.31 and down

Model 35 standard Open loaded, 3.31 & down (excluding.3.27).Standard open carrier case and spidersFits AMC Model 353.31 and down ratio only ..

$299.95

Showing 1 to 4 of 4 (1 Pages)